答：可以的，一般鼓PROBURN中文免费版下载安装都具有吹、吸功能！只要您的鼓PROBURN中文免费版下载安装吹出的空气是洁净无油的，就可以为鱼塘进行增氧！在此，小编推荐面积小的鱼塘选用环形PROBURN中文免费版下载安装增氧，又称旋涡气泵！面积大的鱼塘选用罗茨鼓PROBURN中文免费版下载安装增氧！

       渔塘增氧高压PROBURN中文免费版下载安装是由气体高压力送进输气管，输气管再将气体送进微孔板曝气管或者别的曝气设备;因为其直径小，可造成很多微优化汽泡从管内出现分散化到水里，并且升高速率迟缓汽泡在水中挪动行程安排长与水触碰充足气高效液相间氧原子互换充足而且还出现了流水的转动和左右流动性。流水的左右流动性将顶层含有O2的水带到**层与此同时流水的转动流动性将微孔板管周边含有O2的水向扩散完成饲养水面的匀称增氧。

　　渔塘增氧高压PROBURN中文免费版下载安装商品是一种低噪声、运作稳、使用寿命长的，融入增产、高效率水产品养殖的*机器设备之一;合理使用增氧机，不仅能够避免和缓解浮头，并且能够改善水质，**池塘水质循环系统，推动浮游动物繁育，是科学合理喂鱼，**饲养相对密度，**饲养单位面积生产量，从而**水产品养殖经济收益的关键具体措施，早已被众多水产养殖专业户和养殖厂普遍营销推广和运用。

　　水产品养殖增氧PROBURN中文免费版下载安装规格型号

　　输出功率：1.1KW、1.3KW、1.5KW、1.6KW、2.2KW、3KW、3.7KW、4KW、5.5KW、7.5KW、8.5KW11KW、12.5KW、15KW、25KW;气压：50mbar-650mbar;排风量：40立方米/钟头-1134立方米/钟头(为便捷采用不一样规格型号，单段式/双段式均货源充足给予);工作频率：50Hz/60Hz;工作电压：110V-615V，iwc万国工作电压，世界各国均可应用。如需独特工作电压，可按要求订制。

　　水产品养殖增氧鼓PROBURN中文免费版下载安装工作原理

　　接通电源后，离心PROBURN中文免费版下载安装转动，由于离心叶轮有凹形槽设计方案，会推动空气流动，因此气体根据进气口处进到泵身体内，气体在里面搅拌，每一个凹形槽通过涡旋式的增加，一道一道的循环系统增加而产生强劲的空气力量，根据排气口排出来泵壳外，以便应用。

　　水产品养殖增氧PROBURN中文免费版下载安装特性

　　1、生产量**明显。曝气式增氧机器对水质增氧效果非常的好，不容易把水搅浑和伤到鱼种、虾苗、蟹苗，使鱼、虾、蟹维持充沛的基础代谢，存活率高。与此同时，因为**层增氧机管路遍布匀称，可合理**鱼、虾、蟹的饲养相对密度。2、产生汽泡小，遍布匀称溶氧气量大，尤其对水质底端增氧效果明显。曝气管在水底端造成“V”型做雾化汽泡流，在水位2米左右，做雾化汽泡总宽可以达到3-4米。圆盘式曝气增氧机器设备在水下造成涡旋做雾化汽泡流，一个直径为1.2米的圆盘式曝气增氧机器设备合理增氧总面积可以达到350平米

　　水产品养殖增氧PROBURN中文免费版下载安装的增氧优势分析

　　1、采用水池增氧技术性，能够避免池塘氧气不足。一般使用水车式增氧机的池塘，顶层水质非常少氧气不足，但却无法给予水池充裕O2，因此氧气不足全是在池塘底端使草虾处在亚氧气不足情况。水池增氧技术性恰好是运用了池塘底端组装的气盘，把含氧气体立即输到池塘底端，从水池往上面向水质栓气填补O2，使底端水质一样维持高的溶氧，做到5mgL之上，避免**层氧气不足造成的水质亚氧气不足。阴雨天或雨天应用，还可避免下雨过后水质分层次导致的湖面和水下溶氧遍布不均衡。2、确保底端溶氧成分能抑制有危害微生物菌种的滋长，加速**化学废弃物的溶解，减低有毒物质的的含量，活性池塘底泥，维持水体物理化学因素的平稳。并预防因为溶氧不够而造成的、对鱼、虾、蟹造成巨大危害性的亚硝酸钠、高锰酸盐指数及氯化氢的形成。避免草虾造成应激反应，减小病虫害的产生，**饲养通过率。3、环保节能。组装高效节能底端曝气氧气充足系统软件相互配合走私车式增氧机，增氧高效率可明显提高。尤其是饲养后半期，必须长期制氧时，相互配合底端曝气氧气充足系统软件既能够足氧，而底端曝气氧气充足系统软件耗费的资源仅仅走私车式增氧机的十分之一。3KW的底端曝气氧气充足系统软件可与此同时给20亩池塘供足氧。而直接应用走私车式增氧机的池塘要zui少配置1000瓦/亩才可以。而针对对鱼、虾、蟹饲养放早苗盖大棚的养殖场，由于温室大棚自然通风受阻，在传统式增氧机增氧效果不明显的情况下，组装高效节能底端曝气氧气充足系统软件效果更好。4、根据组装高效节能底端曝气氧气充足系统软件，维持了水体平稳，改进了池塘自然环境，**饲养水生动物的抗病能力，进而能合理地操纵病虫害的产生，降低服药，减少服药成本费及精饲料指数。根据实践活动对比实验，组装有高效节能底端曝气氧气充足系统软件的池塘服药成本是0.2元/斤，精饲料系数是0.8。而没有安装高效节能底端曝气氧气充足系统软件的池塘药成本是0.5元/斤，精饲料系数是1.2。

　　水产品养殖渔塘增氧离心PROBURN中文免费版下载安装的正确使用

　　1、大晴天下午启动增氧机1～2钟头，充分运用增氧离心PROBURN中文免费版下载安装的曝气增氧功效，**水面溶氧，并加快池塘物质循环，改进水体，降低浮头产生。一定留意防止大晴天黄昏开机，会使下水管道层提早热对流，扩大氧耗隔水层和耗氧，非常容易造成鱼种浮头。

　　2、下雨天，浮游植物植物光合作用弱，水面溶氧不够，易造成浮头。这时务必充分运用增氧离心PROBURN中文免费版下载安装的曝气增氧功效;在夜里或早上开机增氧，立即改进水面溶氧状况，做到避免和拯救鱼种浮头的目地。防止下雨天下午开机，这时开机，不仅无法提高下一层水的溶氧，并且出现了池塘溶氧的耗费，非常容易造成鱼种浮头。

　　3、夏秋季时节，大白天水温高，微生物运动量大，氧耗多，黎明时一般可适度开机，**溶氧。若有浮头征兆时，开机应急，不可以关机，直到太阳升起后，在河面无鱼时才可以关机。

　　4、当很多上肥后，水体太肥时，要选用大晴天下午开机和早晨开机紧密结合的方式，改进水面溶氧标准，防止浮头。增氧机的应用，除与之上气温、水的温度、水体相关之外，还应融合喂鱼详细情况，依据水面溶氧变化趋势，灵便把握开机方式和开机时长，以做到合理使用、提质增效提高产量的目地。

　　总而言之，增氧PROBURN中文免费版下载安装的应用基本原则：晴朗下午开，阴雨天早晨开，绵延连阴雨深夜开，黄昏不动，阴雨天白天不开，浮头早开;空气酷热开机时间长，气温清凉开机时间较短，深夜开机时间长，下午开机时间较短，负载面积大开机时间长，负载总面积小开机时间较短，保证立即增氧。

　　髙压曝气离心PROBURN中文免费版下载安装主要用途

　　1、工业生产拌和曝气、清理曝气、污水处理鼓PROBURN中文免费版下载安装曝气、水产品养殖曝气、增氧、河道治理P站PROBURN中文版软件曝气等;2、医院门诊、实验室的废水拌和曝气;3、印刷行业的真空泵送纸。4、电镀槽、化工废水的拌和曝气;5、塑焊、吹PROBURN中文免费版下载安装的气动阀门供货;6、燃烧机的喷雾器、夹层玻璃工业生产;7、水产品养殖;8、原材料、微生物、水解酸化池等发醇曝气;9、必须气动阀门的其他设备。

　　A: Yes. Generally, the blower has the function of blowing and sucking! As long as the air blown by your blower is clean and oil-free, you can oxygenate the fish pond! Here, Xiaobian recommends that the fishpond with small area use the annular fan for oxygenation, also known as the vortex air pump! Roots blower is used to increase oxygen in large fishponds!

　　The high-pressure fan for fish pond oxygenation is delivered to the gas transmission pipeline under high pressure, and then the gas is sent to the microplate aeration pipe or other aeration equipment; Because of its small diameter, many micro optimized bubbles are dispersed from the pipe to the water, and the rising rate is slow. The moving travel of the bubbles in the water is arranged to be long. The oxygen atoms between the high-performance liquid phase and the water touch the sufficient gas are exchanged sufficiently, and the rotation of the running water and the left-right fluidity also occur. The left-right fluidity of the flowing water brings the water containing O2 from the top layer to the bottom layer. At the same time, the rotational fluidity of the flowing water diffuses the water containing O2 around the microplate tube to complete the symmetrical oxygenation of the feeding water surface.

　　The high-pressure fan for fish pond oxygenation is one of the * machinery and equipment with low noise, stable operation and long service life, which is integrated into the production increase and high-efficiency aquaculture of aquatic products; The rational use of aerators can not only avoid and alleviate floating heads, but also improve water quality, improve the pond water quality circulation system, and promote the breeding of zooplankton. It is a key specific measure to scientifically and reasonably feed fish, improve the relative density of feeding, and increase the production per unit area of feeding, so as to enhance the economic benefits of aquatic products breeding. It has long been widely marketed, promoted and used by many aquaculture professionals and aquaculture plants.

　　Specification and model of aquatic product breeding aerator

　　Output power: 1.1KW, 1.3KW, 1.5KW, 1.6kw, 2.2kW, 3KW, 3.7KW, 4kw, 5.5kW, 7.5kW, 8.5kw11kw, 12.5KW, 15kw, 25kW; Air pressure: 50mbar-650mbar; Exhaust air volume: 40m3 / h -1134m3 / h (for the convenience of adopting different specifications and models, single-stage / double-stage models are provided with sufficient supply); Operating frequency: 50hz/60hz; Working voltage: 110v-615v, IWC universal working voltage, which can be applied all over the world. If special working voltage is required, it can be customized according to requirements.

　　Working principle of aerating blower for aquaculture

　　After the power is turned on, the centrifugal fan rotates. As the centrifugal impeller has a concave groove design scheme, it will promote the air flow. Therefore, the gas enters the pump body according to the air inlet, and the gas is stirred inside. Each concave groove is increased through the vortex type, and the circulation system is increased one by one to generate strong air force, which is discharged out of the pump shell according to the exhaust port for application.

　　Characteristics of aerator for aquaculture

　　1. The production increased significantly. The aerated aerator has a very good effect on water oxygenation. It is not easy to muddy the water and hurt the fish, shrimp and crab fry, so that the fish, shrimp and crab can maintain sufficient basic metabolism and high survival rate. At the same time, because the pipelines of the bottom aerator are well distributed, the relative feeding density of fish, shrimp and crab can be reasonably increased. 2. The bubbles are small, and the amount of dissolved oxygen is large, especially for the bottom end of water quality. The aeration pipe creates a "V" shaped atomization bubble flow at the bottom. At the water level of about 2m, the total width of the atomization bubble can reach 3-4m. The disc type aeration and oxygenation machine and equipment cause vortex as atomized bubble flow under the water. The total reasonable oxygenation area of a disc type aeration and oxygenation machine and equipment with a diameter of 1.2m can reach 350 square meters

　　Analysis on the oxygen increasing advantages of the aerator for aquaculture

　　1. By adopting the pool oxygenation technology, the lack of oxygen in the pond can be avoided. Generally, in the pond with water wheel type aerator, the water quality at the top layer is very little, but the oxygen is insufficient, but the pond cannot be supplied with sufficient O2. Therefore, the lack of oxygen is all at the bottom of the pond, making the grass shrimp in the situation of sub oxygen deficiency. The technical feature of pool oxygenation is just that the air disk assembled at the bottom of the pond is used to transport the oxygenated gas to the bottom of the pond immediately, and fill O2 from the pool to the water quality plug gas, so that the water quality at the bottom can maintain a high dissolved oxygen level, above 5mgl, to avoid the lack of water sub oxygen caused by the lack of oxygen at the bottom. The application in cloudy and rainy days or rainy days can also avoid the uneven distribution of dissolved oxygen on the lake surface and underwater caused by the stratification of water quality after rain. 2. Ensure that the bottom dissolved oxygen component can inhibit the growth of harmful microbial strains, accelerate the dissolution of organic chemical wastes, reduce the content of toxic substances, activate the sediment of the pond, and maintain the stability of the physical and chemical factors of the water body. And prevent the formation of sodium nitrite, permanganate index and hydrogen chloride caused by insufficient dissolved oxygen and causing great harm to fish, shrimp and crab. Avoid the stress reaction caused by Grasscarp, reduce the occurrence of diseases and pests, and improve the feeding pass rate. 3. Environmental protection and energy conservation. Assemble the high-efficiency and energy-saving bottom aeration oxygen adequacy system software to cooperate with the smuggled car type aerator, and the oxygenation efficiency can be significantly improved. Especially in the second half of the feeding period, when it is necessary to produce oxygen for a long time, the bottom aeration oxygen adequacy system software can provide enough oxygen, and the resources consumed by the bottom aeration oxygen adequacy system software are only one tenth of those of the smuggled car type aerators. The 3KW bottom aeration oxygen adequacy system software can supply enough oxygen to a 20 mu pond at the same time. However, the pond directly using the smuggled vehicle type aerator should be equipped with 1000 watts / mu less. However, for the farms that feed fish, shrimp and crab with early seedlings and cover the greenhouse, due to the obstruction of natural ventilation in the greenhouse, it is better to assemble the high-efficiency and energy-saving bottom aeration oxygen adequacy system software under the condition that the effect of traditional aerators is not obvious. 4. According to the assembly of the high-efficiency and energy-saving bottom aeration oxygen adequacy system software, the water body is kept stable, the natural environment of the pond is improved, and the disease resistance of aquatic animals is improved, so as to reasonably control the production of diseases and pests, reduce medication, reduce medication cost and concentrate index. According to the comparative experiment of practical activities, the medication cost of pond equipped with high-efficiency and energy-saving bottom aeration oxygen adequacy system software is 0.2 yuan / kg, and the concentrate feed coefficient is 0.8. However, the cost of pond medicine without installing the software of efficient and energy-saving bottom aeration oxygen adequacy system is 0.5 yuan / kg, and the coefficient of concentrate feed is 1.2.

　　Correct use of centrifugal fan for oxygenation in fishery ponds

　　1. In the afternoon of a sunny day, start the aerator for 1 ~ 2 hours, make full use of the aeration and oxygenation effect of the aerated centrifugal fan, improve the dissolved oxygen on the water surface, accelerate the material circulation in the pond, improve the water body and reduce the production of floating heads. Attention must be paid to prevent startup at dusk on sunny days, which will lead to early thermal convection in the sewer layer, expand the oxygen consumption aquiclude and oxygen consumption, and easily cause floating head of fish species.

　　2. In rainy days, the photosynthesis of phytoplankton is weak, and the dissolved oxygen on the water surface is not enough, which is easy to cause floating heads. At this time, make full use of the aeration and oxygenation effect of the oxygenation centrifugal fan; Start the machine at night or in the morning to increase oxygen, immediately improve the dissolved oxygen on the water surface, so as to avoid and save the floating head of fish species. In case of startup in the afternoon on rainy days, it will not improve the dissolved oxygen of the next layer of water, and there will be consumption of dissolved oxygen in the pond, which is very easy to cause floating head of fish species.

　　3. In summer and autumn, the water temperature is high in the daytime, the microbial movement is large, and the oxygen consumption is high. Generally, the machine can be started properly at dawn to improve the dissolved oxygen. If there is a floating head sign, turn on the machine for emergency and do not turn it off until the sun rises and there is no fish on the river.

　　4. When the water body is too fertile after many fertilizers are applied, the method of closely combining the afternoon startup and the morning startup on a sunny day should be selected to improve the dissolved oxygen standard on the water surface and prevent floating head. The application of aerator is not only related to the above air temperature, water temperature and water body, but also should integrate the details of fish feeding. According to the change trend of dissolved oxygen on the water surface, it should flexibly grasp the startup mode and startup duration, so as to achieve the goal of rational use, improving quality and efficiency and increasing output.

　　In a word, the basic principles for the application of the aerator fan are as follows: open in a sunny afternoon, open in the morning on a rainy day, open late at night on a continuous rainy day, do not move at dusk, do not open during the day on a rainy day, and open the floating head early; The air is very hot, the temperature is cool, the start-up time is short, the late night start-up time is long, the afternoon start-up time is short, the load area is large, the start-up time is long, the total load area is small, the start-up time is short, and the immediate oxygenation is guaranteed.

　　Main uses of high pressure aeration centrifugal fan

　　1. Industrial production mixing aeration, cleaning aeration, sewage treatment blower aeration, aquatic product breeding aeration, oxygenation, river treatment engineering aeration, etc; 2. Mixing and aeration of waste water in hospital outpatient and laboratory; 3. Vacuum pumping in printing industry. 4. Mixing and aeration of electroplating tank and chemical wastewater; 5. Supply of pneumatic valves for plastic welding and blower; 6. Industrial production of spray and laminated glass for combustion machine; 7. Aquaculture of aquatic products; 8. Raw materials, microorganisms, hydrolysis acidification tank and other alcohol generation aeration; 9. Other equipment that must be pneumatically operated.